Clear Filters | 181 - 200 of 238 results

436th Maintenance Squadron mission continues despite COVID-19

A C-5C Space Cargo Modified Galaxy from Travis Air Force Base, California, is parked on the flight line at Dover AFB, Delaware, April 8, 2020. The C-5C SCM has the troop compartment removed and a modification to the rear loading doors. It is specially modified to carry satellites and other large cargo. (U.S. Air Force photo by Senior Airman Christopher Quail)
Details Download

200410-F-LS379-1027

Airman 1st Class Trent Ramsey, 436th Aerial Port Squadron air transportation cargo processor, completes a medical screening while wearing a 3D printed face shield April 10, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the Dover Air Force Base Innovation Lab "BEDROCK" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200410-F-LS379-1012

Airman 1st Class Trent Ramsey, 436th Aerial Port Squadron air transportation cargo processor (left), and Senior Airman Dominique Hedges, 436th Medical Group physical therapy tech (right), man a medical screening check point while wearing 3D printed face shields April 10, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the Dover Air Force Base Innovation Lab "BEDROCK" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

Dover DoD Civilian Sews Masks for Community

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic. (U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-MO780-1054

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews a mask to donate April 10, 2020, at Dover Air Force Base, Delaware. Lawrence also makes surgical caps for Kent General Hospital in Dover. (U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

180723-F-OK627-1020

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic. (U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-MO780-1087

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic. (U.S. Air Force Photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-MO780-1102

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic.(U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-BO262-1007.jpg

Staff Sgt. David Rhodes, 436th Logistics Readiness Squadron unit deployment manager, along with his son Keegan and daughter Hailey, wait for the Easter Bunny, Tech. Sgt. Jeffrey Seastrand, 436th LRS, to pass their home in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1015.jpg

Isabella Goeke, daughter of Lt. Col. Robert Goeke, 436th Contracting Squadron commander, waves to the Easter Bunny in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware.A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1016.jpg

Tech. Sgt. David Miller, 436th Maintenance Group weapon systems controller, along with his family, wave to the Easter Bunny as he passes their vehicle in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1018.jpg

The Easter Bunny waves to housing residents in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1004.jpg

The Easter Bunny waves to housing residents of Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area on Good Friday while observing social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200407-F-LS379-1037

Master Sgt. Justin Pittman, innovation lab senior project manager, removes newly printed face shield headbands from a 3D printer April 7, 2020, at Dover Air Force Base, Del. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1028

Master Sgt. Justin Pittman, innovation lab senior project manager, inspects laminant sheets used for face shields April 7, 2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1027

A completed face shield is set aside prior to being tested on April 7, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1024

3D modeling software depicts the final 3D print for face shield adjustable headbands on April 7, 2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1015

Master Sgt. Justin Pittman, innovaton lab senior project manager, holds a completed face shield April 7,2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1007

A 3D printer creates face shield adjustable headbands on April 7, 2020 at Dover Air Force Bace, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1006

A 3D printer creates face shield adjustable headbands on April 7, 2020 at Dover Air Force Bace, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download