Clear Filters | 301 - 320 of 2129 results

200410-F-LS379-1012

Airman 1st Class Trent Ramsey, 436th Aerial Port Squadron air transportation cargo processor (left), and Senior Airman Dominique Hedges, 436th Medical Group physical therapy tech (right), man a medical screening check point while wearing 3D printed face shields April 10, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the Dover Air Force Base Innovation Lab "BEDROCK" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200410-F-BO262-1007.jpg

Staff Sgt. David Rhodes, 436th Logistics Readiness Squadron unit deployment manager, along with his son Keegan and daughter Hailey, wait for the Easter Bunny, Tech. Sgt. Jeffrey Seastrand, 436th LRS, to pass their home in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1015.jpg

Isabella Goeke, daughter of Lt. Col. Robert Goeke, 436th Contracting Squadron commander, waves to the Easter Bunny in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware.A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1016.jpg

Tech. Sgt. David Miller, 436th Maintenance Group weapon systems controller, along with his family, wave to the Easter Bunny as he passes their vehicle in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1018.jpg

The Easter Bunny waves to housing residents in Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area in a vehicle driven by Staff Sgt. Tate Booms, 436th LRS vehicle maintenance, accompanied by his wife Cassidy, USO Delaware volunteer. On this Good Friday, the Easter Bunny and residents observed social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200410-F-BO262-1004.jpg

The Easter Bunny waves to housing residents of Eagle Heights housing April 10, 2020, at Dover Air Force Base, Delaware. A small caravan of USO volunteers, 436th Security Forces Squadron and Civil Engineer Squadron vehicles, escorted the Easter Bunny around the housing area on Good Friday while observing social distancing to mitigate the spread of COVID-19. (U.S. Air Force photo by Roland Balik)
Details Download

200407-F-LS379-1037

Master Sgt. Justin Pittman, innovation lab senior project manager, removes newly printed face shield headbands from a 3D printer April 7, 2020, at Dover Air Force Base, Del. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1028

Master Sgt. Justin Pittman, innovation lab senior project manager, inspects laminant sheets used for face shields April 7, 2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1027

A completed face shield is set aside prior to being tested on April 7, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1024

3D modeling software depicts the final 3D print for face shield adjustable headbands on April 7, 2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1015

Master Sgt. Justin Pittman, innovaton lab senior project manager, holds a completed face shield April 7,2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1007

A 3D printer creates face shield adjustable headbands on April 7, 2020 at Dover Air Force Bace, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1006

A 3D printer creates face shield adjustable headbands on April 7, 2020 at Dover Air Force Bace, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200326-F-DA916-1203

A pair of Eurofighter Typhoons take off, March 26, 2020, at Dover Air Force Base, Delaware. The U.S Air Force and it’s Air Mobility Command welcome the opportunity to support our international partners and Allies as they respond to impacts of the COVID-19 pandemic. Dover Air Force Base hosted more than a dozen aircraft as they return to their home countries following the cancellation of Exercise Red Flag at Nellis AFB, Nevada. Through intense internal coordination and in collaboration with interagency partners, all of the affected aircraft have been approved to redeploy to their host nations. Dover continues to prioritize the safety of our service members and community as we support the safe return of our NATO partners. (U.S. Air Force photo by Mauricio Campino)
Details Download

200326-F-DA916-1008

Spanish Airmen prepare Eurofighter Typhoons for take-off, March 26, 2020, at Dover Air Force Base, Delaware. The U.S Air Force and it’s Air Mobility Command welcome the opportunity to support our international partners and Allies as they respond to impacts of the COVID-19 pandemic. Dover Air Force Base hosted more than a dozen aircraft as they return to their home countries following the cancellation of Exercise Red Flag at Nellis AFB, Nevada. Through intense internal coordination and in collaboration with interagency partners, all of the affected aircraft have been approved to redeploy to their host nations. Dover continues to prioritize the safety of our service members and community as we support the safe return of our NATO partners. (U.S. Air Force photo by Mauricio Campino)
Details Download

200326-F-DA916-1011

Spanish Airmen prepare Eurofighter Typhoons for take-off, March 26, 2020, at Dover Air Force Base, Delaware. The U.S Air Force and it’s Air Mobility Command welcome the opportunity to support our international partners and Allies as they respond to impacts of the COVID-19 pandemic. Dover Air Force Base hosted more than a dozen aircraft as they return to their home countries following the cancellation of Exercise Red Flag at Nellis AFB, Nevada. Through intense internal coordination and in collaboration with interagency partners, all of the affected aircraft have been approved to redeploy to their host nations. Dover continues to prioritize the safety of our service members and community as we support the safe return of our NATO partners. (U.S. Air Force photo by Mauricio Campino)
Details Download

200326-F-DA916-1018

Capt. Travis Parrott, 3rd Airlift Squadron C17 Globemaster pilot, speaks with a member of a Spanish air crew during final pre-flight preparations for eight Eurofighter Typhoons, March 26, 2020, at Dover Air Force Base, Delaware. The U.S Air Force and it’s Air Mobility Command welcome the opportunity to support our international partners and Allies as they respond to impacts of the COVID-19 pandemic. Dover Air Force Base hosted more than a dozen aircraft as they return to their home countries following the cancellation of Exercise Red Flag at Nellis AFB, Nevada. Through intense internal coordination and in collaboration with interagency partners, all of the affected aircraft have been approved to redeploy to their host nations. Dover continues to prioritize the safety of our service members and community as we support the safe return of our NATO partners. (U.S. Air Force photo by Mauricio Campino)
Details Download

Dover Airmen maintain operations despite COVID-19 pandemic

A Dover C-5M Super Galaxy flies over Dover Air Force Base, Delaware, March 30, 2020. Despite the COVID-19 pandemic and significantly reduced manning, aircrews continue to fly in support of global and national response efforts. (U.S. Air Force photo by Senior Airman Christopher Quail)
Details Download

Dover Airmen maintain operations despite COVID-19 pandemic

Tech. Sgt. Erickson Pilar, 436th Medical Support Squadron noncommissioned officer in charge of medical maintenance, works on a diesel generator at Dover Air Force Base, Delaware, March 30, 2020. The generator was attached to a tent that was built to prepare for patient overflow due to COVID-19. Dover AFB medical personnel continue to provide care to Airmen and their families, while supporting state and national response efforts. (U.S. Air Force photo by Senior Airman Christopher Quail)
Details Download

Dover Airmen maintain operations despite COVID-19 pandemic

Airman 1st Class Guadalupa Rolon Pena, 436th Security Forces Squadron response force member (middle), and Airman 1st Class Kathleen Smith (right), 436th Health Care Operations Squadron pediatric medical technician, help direct patients at the medical clinic’s front desk at Dover Air Force Base, Delaware, March 30, 2020. The medical clinic is sectioned off to help prevent any spread of illnesses. Dover AFB medical personnel continue to provide care for Airmen and their families, while supporting state and national response efforts. (U.S. Air Force photo by Senior Airman Christopher Quail)
Details Download