Clear Filters | 41 - 60 of 119 results

210325-F-DA916-2009

Second Lt. Bailey Ishler, 436th Operations Support Squadron innovation lab director, briefs Delaware State University faculty and students on the Bedrock innovation lab mission and capabilities at Dover Air Force Base, Delaware, March 25, 2021. The facility boasts over 5,000 square feet of large, collaborative workspaces, an event stage, a virtual reality classroom, a podcast studio and a prototyping lab with 3D printers. (U.S. Air Force photo by Mauricio Campino)
Details Download

210325-F-DA916-2002

Michael Casson, Delaware State University Dean for the College of Business, arrives at the Bedrock innovation lab on Dover Air Force Base, Delaware, March 25, 2021. A group of faculty and students visited the lab in support of a continued partnership between DSU and Dover AFB. (U.S. Air Force photo by Mauricio Campino)
Details Download

CMSAF Bass tours Dover innovation lab

Tech. Sgt. Kareema Palmer, 436th Operational Medical Readiness Squadron optometry noncommissioned officer in charge, briefs Chief Master Sgt. of the Air Force JoAnne S. Bass and Chief Master Sgt. Mike Perry, Air Force First Sergeant special duty manager, on the use of patient optometry cards to improve care at Dover Air Force Base, Delaware, Jan. 8, 2021. During their tour of the Bedrock innovation lab, Bass and Perry listened to and learned from Team Dover Airmen, who are using innovation to solve strategic problems. (U.S. Air Force photo by Senior Airman Christopher Quail)
Details Download

200820-F-LS379-1021

2nd Lt. Jacob Boswell assigned to the 436th OSS One-Stop Program, inventories Aug. 20, 2020, at Dover Air Force Base, Delaware. The concept evolved over several years here at Dover and throughout Air Mobility Command with the intent of preparing flight crews to be ready to go and sent out the door as fast as possible. (U.S. Air Force Photo by Airman 1st Class Jonathan Harding)
Details Download

200820-F-LS379-1040

A 9th Airlift Squadron flight crew goes through their equipment prior to a mission Aug. 20, 2020, at Dover Air Force Base, Delaware. All equipment is centrally located in the One Stop office for easier epediting. (U.S. Air Force Photo by Airman 1st Class Jonathan Harding)
Details Download

200820-F-LS379-1063

Airman 1st Class Kristopher Kelly, a 9th Airlift Squadron loadmaster (left) and Senior Airman Brayon Moore, a 9th Airlift Squadron loadmaster clear a weapon Aug. 20, 2020, at Dover Air Force Base, Delaware. Dover One Stop shop has a clearing barrel right outside their office to shorten the time required for flight crews to get their weapons. (U.S. Air Force Photo by Airman 1st Class Jonathan Harding)
Details Download

200820-F-LS379-1103

An Airman assigned to the 9th Airlift Squadron clears an M9 Beretta Aug. 20, 2020, at Dover Air Force Base, Delaware. Instead of crews going to the security forces armory, they can recieve their firearms from the Dover One Stop shop. (U.S. Air Force Photo by Airman 1st Class Jonathan Harding)
Details Download

200410-F-LS379-1027

Airman 1st Class Trent Ramsey, 436th Aerial Port Squadron air transportation cargo processor, completes a medical screening while wearing a 3D printed face shield April 10, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the Dover Air Force Base Innovation Lab "BEDROCK" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200410-F-LS379-1012

Airman 1st Class Trent Ramsey, 436th Aerial Port Squadron air transportation cargo processor (left), and Senior Airman Dominique Hedges, 436th Medical Group physical therapy tech (right), man a medical screening check point while wearing 3D printed face shields April 10, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the Dover Air Force Base Innovation Lab "BEDROCK" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

Dover DoD Civilian Sews Masks for Community

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic. (U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-MO780-1054

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews a mask to donate April 10, 2020, at Dover Air Force Base, Delaware. Lawrence also makes surgical caps for Kent General Hospital in Dover. (U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

180723-F-OK627-1020

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic. (U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-MO780-1087

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic. (U.S. Air Force Photo by Airman 1st Class Faith Schaefer)
Details Download

200410-F-MO780-1102

Jean Lawrence, 436th Logistics Readiness Squadron secretary, sews cloth masks for donation to local hospitals, emergency service providers and members of the Team Dover community, April 10, 2020, at Dover Air Force Base, Delaware. Lawrence has sewn 77 masks so far and continues to make more in an effort to take care of Airmen and their families during the COVID-19 pandemic.(U.S. Air Force photo by Airman 1st Class Faith Schaefer)
Details Download

200407-F-LS379-1037

Master Sgt. Justin Pittman, innovation lab senior project manager, removes newly printed face shield headbands from a 3D printer April 7, 2020, at Dover Air Force Base, Del. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1028

Master Sgt. Justin Pittman, innovation lab senior project manager, inspects laminant sheets used for face shields April 7, 2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1027

A completed face shield is set aside prior to being tested on April 7, 2020 at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1024

3D modeling software depicts the final 3D print for face shield adjustable headbands on April 7, 2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1015

Master Sgt. Justin Pittman, innovaton lab senior project manager, holds a completed face shield April 7,2020, at Dover Air Force Base, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download

200407-F-LS379-1007

A 3D printer creates face shield adjustable headbands on April 7, 2020 at Dover Air Force Bace, Delaware. The face shields were printed by the 436th Airlift Wing Innovation Lab "Bedrock" for use by medical and security forces personnel supporting COVID-19 response efforts. (U.S. Air Force photo by Airman 1st Class Jonathan Harding)
Details Download