Team Dover honorary commanders tour 436th MXG

Air Reserve Technician Master Sgt. John Greene, 512th Maintenance Squadron metals technology section NCO in charge, watches Katrina Sullivan, 512th Mission Support Group honorary commander, cut through a piece of angle iron using a plasma cutter during a tour of the 436th Maintenance Group March 29, 2017, on Dover Air Force Base, Del. Twenty-three honorary commanders received mission briefings, toured various facilities and visited with Team Dover members during their one-day visit. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Andy Johnson, 436th Airlift Wing command chief honorary commander, puts on protective coveralls prior to entering a C-5 wing fuel tank trainer March 29, 2017, on Dover Air Force Base, Del. Johnson donned an air respirator prior to entering the trainer as if he was going to perform fuel tank maintenance or simulate being rescued during a confined area training exercise. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Tech. Sgt. Donald Hilmanowski, 736th Aircraft Maintenance Squadron vehicle control NCO in charge, instructs Rob Meding, 436th Logistics Readiness Squadron honorary commander, on how to de-ice a C-17 Globemaster III using the Global GS deicing simulator March 29, 2017, on Dover Air Force Base, Del. The simulator allows aircraft maintainers to practice deicing procedures on 16 different types of aircraft using forced air and/or glycol to remove snow and ice. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Master Sgt. Stephen Miller, 436th Aircraft Maintenance Squadron consolidated tool krib NCO in charge, explains to Bobby Pancake, 436th Airlift Wing honorary commander; Sandy Caloway, 436th Civil Engineer Squadron honorary commander; and Matt Kaye, guest of Bobby Pancake, how items located in CTK are accounted with the aid of barcodes March 29, 2017, on Dover Air Force Base, Del. Miller told the honorary commanders that items being checked in or out are scanned and can be identified as belonging to Dover AFB’s CTK inventory. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Honorary commanders Todd Ewald, 436th Aircraft Maintenance Squadron; Mike Caloway, 9th Airlift Squadron; Tom Banez, Air Force Mortuary Affairs Operations; and John Yoho, Honorary Commander alumni, listen to Tech. Sgt. Shawn Walters, 436th Maintenance Squadron metals technology craftsman, elaborate on a current project March 29, 2017, on Dover Air Force Base, Del. Walters explained the process of using computer aided drafting technology for machining parts out of aluminum. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Honorary commander Mike Caloway, 9th Airlift Squadron, and John Yoho, Honorary Commander alumni, watch Rob Meding, 436th Logistics Readiness Squadron honorary commander, prepare an aircraft panel for hot bonding March 29, 2017, on Dover Air Force Base, Del. Tech. Sgt. Kenny Pellegrino, 436th Maintenance Squadron sheet metal craftsman, explained to Meding and the others about each step of the hot bonding process. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Team Dover Honorary Commanders position a cargo net over a pallet March 29, 2017, at the 436th Aerial Port Squadron on Dover Air Force Base, Del. Two teams of honorary commanders, with the help of a few Port Dawgs, competed against each other in a pallet build-up competition. (U.S. Air Force photo by Roland Balik)

Team Dover honorary commanders tour 436th MXG

Team Dover Honorary Commanders pose for a photo at the 436th Maintenance Squadron Fabrication Flight March 29, 2017, on Dover Air Force Base, Del. Twenty-three honorary commanders received mission briefings, toured various 436th Maintenance Group facilities, visited with Team Dover members and participated in hands-on demonstrations. (U.S. Air Force photo by Roland Balik)

Snapshot: Team Dover honorary commanders tour 436th MXG

Published April 5, 2017
By Roland Balik
436th Airlift Wing Public Affairs

DOVER AIR FORCE BASE, Del. -- Air Reserve Technician Master Sgt. John Greene, 512th Maintenance Squadron metals technology section NCO in charge, watches Katrina Sullivan, 512th Mission Support Group honorary commander, cut through a piece of angle iron using a plasma cutter during a tour of the 436th Maintenance Group March 29, 2017, on Dover Air Force Base, Del. Twenty-three honorary commanders received mission briefings, toured various facilities and visited with Team Dover members during their one-day visit. (U.S. Air Force photo by Roland Balik)