Clear Filters | 121 - 140 of 587 results

9th AS Pelicans fly southwest for joint training

Airman 1st Class Rebecca Reimer, 9th Airlift Squadron loadmaster student, discusses offloading procedures with Staff Sgt. Jordan Chandanais, 49th Logistics Readiness Squadron Air Transportation Function supervisor, while aboard a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. Following an initiative from Air Mobility Command, MSTTs have been in the training plan of the 9th AS since early 2021 to expedite upgrade and qualification training for C-5M Super Galaxy loadmasters and flight engineers. This MSTT was coordinated in partnership with Air Education Training Command’s 49th Wing and Air Force Materiel Command’s 635th Materiel Maintenance Group. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Airman 1st Class Rebecca Reimer, 9th Airlift Squadron loadmaster student, marshals a forklift tractor off the ramp of a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. Following an initiative from Air Mobility Command, MSTTs have been in the training plan of the 9th AS since early 2021 to expedite upgrade and qualification training for C-5M Super Galaxy loadmasters and flight engineers. This MSTT was coordinated in partnership with Air Education Training Command’s 49th Wing and Air Force Materiel Command’s 635th Materiel Maintenance Group. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Airman 1st Class Rebecca Reimer, 9th Airlift Squadron loadmaster student, checks a pre-loading checklist for a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Of the 350 tasks needed to be a fully qualified loadmaster, roughly half can be completed during an MSTT. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Staff Sgt. Alex Delamarter, 9th Airlift Squadron flight engineer student, climbs down the crew stairs of a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. This MSTT was coordinated in partnership with Air Education Training Command’s 49th Wing and Air Force Materiel Command’s 635th Materiel Maintenance Group. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

A truck is loaded onto a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. This MSTT was coordinated in partnership with Air Education Training Command’s 49th Wing and Air Force Materiel Command’s 635th Materiel Maintenance Group. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

The visor of a Dover Air Force Base C-5M Super Galaxy is raised in preparation for an Engine Running Onload during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Senior Airman Edwin Vado, left, 436th Aircraft Maintenance Squadron flying crew chief, and Staff Sgt. Alex Delamarter, 9th Airlift Squadron student flight engineer, review an Engines Running Onload checklist for a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 7, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers.(U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Staff Sgt. Justin Thomas, 9th Airlift Squadron noncommissioned officer in charge of loadmaster training, climbs the troop deck stairs of a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 4, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Of the 350 tasks needed to be a fully qualified loadmaster, roughly half can be completed during an MSTT, reducing the time of training by up to 35 days. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Tech. Sgt. Jaime LaPorte, 9th Airlift Squadron flight engineer student, performs checks on a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 4, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Airman 1st Class Rebecca Reimer, left, 9th Airlift Squadron student loadmaster, and Staff Sgt. Justin Thomas, 9th AS noncommissioned officer in charge of loadmaster training, discuss a joint inspection checklist during a Major Command Service Tail Trainer at Holloman Air Force Base, New Mexico, June 2, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Of the 350 tasks needed to be a fully qualified loadmaster, roughly half can be completed during an MSTT, reducing training time by up to 35 days. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Tech. Sgt. Abimael Santiago-Soto, 9th Airlift Squadron noncommissioned officer in charge of training, explains checklists while instructing flight engineer students aboard a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer at Holloman AFB, New Mexico, June 2, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Airmen from the 635th Materiel Maintenance Group push palletized cargo onto a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer exercise at Holloman AFB, New Mexico, June 2, 2021. Loadmasters from the 9th Airlift Squadron coordinated cargo with Air Education and Training Command’s 49th Wing and Air Force Materiel Command’s 635th MMG Airmen to complete the 10-day MSTT. During the training, Airmen loaded and unloaded 320,085 pounds of cargo, including palletized cargo, aircraft ground equipment, a fuel truck and a K-loader. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Staff Sgt. John Dittess, left, and Senior Airman Amelia Bradfield, both 9th Airlift Squadron loadmasters, calculate the weight of palletized cargo before loading it onto a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer exercise at Holloman AFB, New Mexico, June 2, 2021.The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Over the course of the 10-day MSTT, 9th AS loadmasters loaded and unloaded 320,085 pounds of cargo, including palletized cargo, aircraft ground equipment, a fuel truck and a K-loader. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Senior Airman Amelia Bradfield, 9th Airlift Squadron loadmaster, measures the height of a cargo box before loading it onto a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer exercise at Holloman AFB, New Mexico, June 2, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Over the course of the 10-day MSTT, 9th AS loadmasters loaded and unloaded 320,085 pounds of cargo, including palletized cargo, aircraft ground equipment, a fuel truck and a K-loader. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Airman 1st Class Rebecca Reimer, 9th Airlift Squadron loadmaster student, secures rollers to the cargo deck of a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer exercise at Holloman AFB, New Mexico, June 2, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Over the course of the 10-day MSTT, 9th AS loadmasters loaded and unloaded 320,085 pounds of cargo, including palletized cargo, aircraft ground equipment, a fuel truck and a K-loader. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

9th AS Pelicans fly southwest for joint training

Airman 1st Class Rebecca Reimer, 9th Airlift Squadron loadmaster student, opens the crew entry door panel of a Dover Air Force Base C-5M Super Galaxy during a Major Command Service Tail Trainer exercise at Holloman AFB, New Mexico, June 2, 2021. The 9th AS performs MSTTs to expedite upgrade and qualification training for C-5M loadmasters and flight engineers. Of the 350 tasks needed to be a fully qualified loadmaster, roughly half can be completed during an MSTT, reducing training time by up to 35 days. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

436th AW leadership engages with Airmen

Chief Master Sgt. Tim Bayes, 436th Airlift Wing command chief, speaks to Team Dover during an all call at Dover Air Force Base, Delaware, June 14, 2021. After the assumption of command June 4, this event marked the command team’s first engagement with a large portion of Team Dover. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

436th AW leadership engages with Airmen

Col. Matthew Husemann, 436th Airlift Wing commander, speaks to Team Dover during an all call at Dover Air Force Base, Delaware, June 14, 2021. After the assumption of command June 4, this event marked the command team’s first engagement with a large portion of Team Dover. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

436th AW leadership engages with Airmen

From the left, Chief Master Sgt. Tim Bayes, 436th Airlift Wing command chief, and Col. Matthew Husemann, 436th AW commander, speak to Team Dover during an all call at Dover Air Force Base, Delaware, June 14, 2021. The new 436th AW leaders answered questions from Airmen and emphasized their priorities for Team Dover. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download

436th AW leadership engages with Airmen

From the left, Chief Master Sgt. Tim Bayes, 436th Airlift Wing command chief, and Col. Matthew Husemann, 436th AW commander, speak to Team Dover during an all call at Dover Air Force Base, Delaware, June 14, 2021. The new 436th AW leaders answered questions from Airmen and emphasized their priorities for Team Dover. (U.S. Air Force photo by Senior Airman Faith Schaefer)
Details Download