Clear Filters | 1 - 20 of 25 results

Building the ‘Aerial port of the future’

Capt. Christian Potts, Air Force Research Laboratory autonomous control engineer, reads processed cargo information scanned by the Configured Air Load Building Tool during testing on Dover Air Force Base, Delaware, Nov. 18, 2021. In an effort to modernize the 2T2 career field as part of the Aerial Port of the Future initiative, the 436th Aerial Port Squadron was selected for CALBT testing due to its location and daily cargo movement. (U.S. Air Force photo by Roland Balik)
Details Download

Building the ‘Aerial port of the future’

Vassili Koriabine, Cougaar Software Inc. software engineer, uses a tablet to scan a shipping label attached to a crate at Dover Air Force Base, Delaware, Nov. 18, 2021. In an effort to modernize the 2T2 career field as part of the Aerial Port of the Future initiative, the 436th Aerial Port Squadron was selected for CALBT testing due to its location and daily cargo movement. (U.S. Air Force photo by Roland Balik)
Details Download

Building the ‘Aerial port of the future’

The Configured Air Load Building Tool system scans a pallet of tires during testing on Dover Air Force Base, Delaware, Nov. 17, 2021. In an effort to modernize the 2T2 career field as part of the Aerial Port of the Future initiative, the 436th Aerial Port Squadron was selected for CALBT testing due to its location and daily cargo movement. (U.S. Air Force photo by Roland Balik)
Details Download

Building the ‘Aerial port of the future’

A laptop displays a scanned pallet with five tires during Configured Air Load Building Tool testing on Dover Air Force Base, Delaware, Nov. 17, 2021. The Light Detection and Ranging cameras captured and produced 3D images of cargo being delivered to the 436th Aerial Port Squadron. CALBT is an Aerial Port of the Future initiative currently under development. (U.S. Air Force photo by Roland Balik)
Details Download

Building the ‘Aerial port of the future’

A LiDAR camera is used for Light Detection and Ranging of objects and is one of two cameras used during the Configured Air Load Building Tool testing on Dover Air Force Base, Delaware, Nov. 17, 2021. The LiDAR cameras captured and produced 3D images of cargo being delivered to the 436th Aerial Port Squadron. (U.S. Air Force photo by Roland Balik)
Details Download

Building the ‘Aerial port of the future’

Vassili Koriabine, Cougaar Software Inc. software engineer, measures the total height of five tires on a pallet during Configured Air Load Building Tool testing on Dover Air Force Base, Delaware, Nov. 17, 2021. In an effort to modernize the 2T2 career field as part of the Aerial Port of the Future initiative, the 436th Aerial Port Squadron was selected for CALBT testing due to its location and daily cargo movement. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1045.jpg

Chief Master Sgt. Dawn Kolczynski, U.S. Air Force surgeon general chief of medical operations, was a guest speaker for a podcast from Dover’s Bedrock Innovation Lab, June 26, 2020, at Dover Air Force Base, Delaware. Kolczynski talked to podcast listeners about innovation and leadership, along with Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1047.jpg

Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, was a guest speaker for a podcast from Dover’s Bedrock Innovation Lab, June 26, 2020, at Dover Air Force Base, Delaware. Hogg talked to podcast listeners about COVID-19, innovation and leadership from her perspective. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1050.jpg

From the left, Chief Master Sgt. Dawn Kolczynski, U.S. Air Force surgeon general chief of medical operations, and Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, were guests for a podcast from Dover’s Bedrock Innovation Lab, June 26, 2020, at Dover Air Force Base, Delaware. Hogg and Kolczynski talked to podcast listeners about COVID-19, innovation and leadership from their perspectives. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1022.jpg

Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, speaks with a 10th Expeditionary Aeromedical Evacuation Flight aircrew member June 26, 2020, at Dover Air Force Base, Delaware. Dover serves as the U.S. East Coast hub for the Transport Isolation System. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1025.jpg

Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, talks with Transport Isolation System support team members June 26, 2020, at Dover Air Force Base, Delaware. Dover serves as the U.S. East Coast hub for the Transport Isolation System. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1035.jpg

Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, and Chief Master Sgt. Dawn Kolczynski, AF/SG chief of medical operations, pose for a photo on the ramp of a C-17 Globemaster III, June 26, 2020, at Dover Air Force Base, Delaware. Other personnel in the photo were Dover AFB senior leadership, 10th Expeditionary Aeromedical Evacuation Flight aircrew, the Transport Isolation System support team, 736th Aircraft Maintenance Squadron and 436th Security Forces Squadron personnel (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1006.jpg

Capt. Travis Parrot, 3rd Airlifter Squadron pilot and stage representative, escorts Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, onto a C-17 Globemaster III, June 26, 2020, at Dover Air Force Base, Delaware. Hogg was briefed on the Transport Isolation System and met with 10th Expeditionary Aeromedical Evacuation Flight aircrew, the TIS support team and 736th Aircraft Maintenance Squadron personnel. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1009.jpg

From the left, Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, and Chief Master Sgt. Dawn Kolczynski, AF/SG chief of medical operations, talk with Senior Master Sgt. Michael Malone, 36th Aeromedical Evacuation Squadron training noncommissioned officer in charge and AE technician, from Keesler Air Force Base, Mississippi, inside a Transport Isolation System, June 26, 2020, at Dover Air Force Base, Delaware. Dover serves as the U.S. East Coast hub for the TIS. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1012.jpg

From the left, Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, and Chief Master Sgt. Dawn Kolczynski, AF/SG chief of medical operations, talk with Senior Master Sgt. Michael Malone, 36th Aeromedical Evacuation Squadron training noncommissioned officer in charge and AE technician, and Maj. Mark Dellinger, 36th AES training flight commander, both from Keesler Air Force Base, Mississippi, inside a Transport Isolation System, June 26, 2020, at Dover Air Force Base, Delaware. Dover serves as the U.S. East Coast hub for the TIS. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1003.jpg

A Transport Isolation System unit used to transport COVID-19 patients is positioned on a C-17 Globemaster III, June 26, 2020, at Dover Air Force Base, Delaware. Two TIS units are located at Dover, which serves as the U.S. East Coast hub due to its location and support facilities. (U.S. Air Force photo by Roland Balik)
Details Download

200626-F-BO262-1005.jpg

Capt. Travis Parrot, 3rd Airlift Squadron pilot and stage representative, talks with Lt. Gen. Dorothy Hogg, U.S. Air Force surgeon general, and Chief Master Sgt. Dawn Kolczynski, AF/SG chief of medical operations, in front of a C-17 Globemaster III, June 26, 2020, at Dover Air Force Base, Delaware. Hogg and Kolczynski were given a briefing on the Transport Isolation System and met with 10th Expeditionary Aeromedical Evacuation Flight aircrew, the TIS support team and 736th Aircraft Maintenance Squadron personnel. (U.S. Air Force photo by Roland Balik)
Details Download

Dover helps AFRL make C-17s safer, lighter, more fuel efficient

Justin Smoak, Samson Rope application engineering manager, Ferndale, Wash., observes how the synthetic winch line feeds into a C-17 Globemaster III winch assembly, Jan. 30, 2018 at Dover Air Force Base, Del. Smoak watched maintainers attach and wind the cable onto the winch while looking for any potential issues. (U.S. Air Force photo by Roland Balik)
Details Download

Dover helps AFRL make C-17s safer, lighter, more fuel efficient

Justin Smoak, Samson Rope application engineering manager, Ferndale, Wash., places a synthetic chain into the slotted interface on the C-17 Globemaster III buffer stop assembly, Jan. 30, 2018 at Dover Air Force Base, Del. The buffer stop assembly is a device used during specific C-17 Globemaster III airdrop missions to keep pallets from shifting forward in the cargo compartment. (U.S. Air Force photo by Roland Balik)
Details Download

Dover helps AFRL make C-17s safer, lighter, more fuel efficient

Application engineers from Samson Rope, Ferndale, Wash., brought the proposed synthetic winch cable for C-17 Globemaster III maintainers to wind on a winch assembly, Jan. 30, 2018, at Dover Air Force Base, Del. The 280-foot synthetic winch cable weighs 14 pounds and is 83 percent lighter than the current 80 pound steel wire cable. (U.S. Air Force photo by Roland Balik)
Details Download